From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Thu Mar 13 2003 - 16:06:44 EST
Hi *,
I am migrating one node from a P690 Regatta to another Regatta. The first
Regatta has no SP connectivity at all. The second is SP attached. All 16
LPARs in the second Regatta are HostResponds=yes and installed with PSSP
3.5. They are a base install with no applications.
The LPAR I am migrating has en0 and en1 defined. The SPLAN is defined on
en0 on the second Regatta.
When I installed the LPAR, the customization hung because there was an IP
configuration defined on en0.
Anyone have any suggestions on how I can get around this ? There are
several nodes that I'll be moving to the SPLAN that already have en0
defined.
Thanks, Bill.
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:39 EDT