From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Fri Mar 14 2003 - 09:25:10 EST
when the system had installed the mksysb image, it hung with the IP
address of the source node on en0. psspfb_script and pssp_script never
ran.
BV
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
Holger.VanKoll@SWISSCOM.COM
Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
03/13/2003 03:56 PM
Please respond to "IBM AIX Discussion List"
To: aix-l@Princeton.EDU
cc:
Subject: Re: Cluster 1600 migration (SP)
>When I installed the LPAR, the customization hung because there was an
IP configuration defined on en0.
Could you elaborate on this?
customaziation means "store the sdr-values for en-x on the node".
Normally it doesnt matter what has been defined on the node for en0.
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:39 EDT