From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Fri Mar 14 2003 - 10:19:23 EST
Interesting doc. Thanks!
BV
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
"Green, Simon" <Simon.Green@EU.ALTRIA.COM>
Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
03/14/2003 09:08 AM
Please respond to "IBM AIX Discussion List"
To: aix-l@Princeton.EDU
cc:
Subject: Re: Cluster 1600 migration (SP)
There are some notes in TechDoc about preventing duplicate IP addresses
during NIM installs. You might try implementing this on your NIM master -
CWS, I assume. It's very simple and if it is the IP configuration that's
causing your problem it should take care of it.
https://techsupport.services.ibm.com/server/aix.techTips?refNo=0620
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: Bill Verzal [mailto:Bill_Verzal@BCBSIL.COM]
> Sent: 14 March 2003 14:25
> To: aix-l@Princeton.EDU
> Subject: Re: Cluster 1600 migration (SP)
>
>
> when the system had installed the mksysb image, it hung with the IP
> address of the source node on en0. psspfb_script and
> pssp_script never
> ran.
>
>
>
>
> Holger.VanKoll@SWISSCOM.COM
> Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
> 03/13/2003 03:56 PM
> Please respond to "IBM AIX Discussion List"
>
>
> To: aix-l@Princeton.EDU
> cc:
> Subject: Re: Cluster 1600 migration (SP)
>
>
> >When I installed the LPAR, the customization hung because
> there was an
> IP configuration defined on en0.
>
> Could you elaborate on this?
> customaziation means "store the sdr-values for en-x on the node".
> Normally it doesnt matter what has been defined on the node for en0.
>
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:39 EDT