From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Fri Mar 14 2003 - 10:08:56 EST
There are some notes in TechDoc about preventing duplicate IP addresses
during NIM installs. You might try implementing this on your NIM master -
CWS, I assume. It's very simple and if it is the IP configuration that's
causing your problem it should take care of it.
https://techsupport.services.ibm.com/server/aix.techTips?refNo=0620
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will seldom be appreciated.
> -----Original Message-----
> From: Bill Verzal [mailto:Bill_Verzal@BCBSIL.COM]
> Sent: 14 March 2003 14:25
> To: aix-l@Princeton.EDU
> Subject: Re: Cluster 1600 migration (SP)
>
>
> when the system had installed the mksysb image, it hung with the IP
> address of the source node on en0. psspfb_script and
> pssp_script never
> ran.
>
>
>
>
> Holger.VanKoll@SWISSCOM.COM
> Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
> 03/13/2003 03:56 PM
> Please respond to "IBM AIX Discussion List"
>
>
> To: aix-l@Princeton.EDU
> cc:
> Subject: Re: Cluster 1600 migration (SP)
>
>
> >When I installed the LPAR, the customization hung because
> there was an
> IP configuration defined on en0.
>
> Could you elaborate on this?
> customaziation means "store the sdr-values for en-x on the node".
> Normally it doesnt matter what has been defined on the node for en0.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:39 EDT