From: Renee (renee00@ozemail.com.au)
Date: Tue Jan 20 2004 - 23:21:39 EST
Hey Sun managers,
I'm looking for the Ultrium2 LTO Tape drivers as Veritas Netbackup
does not recognize the type of drive it is. I don't want to configure it
as generic as it wont backup at the suggested speeds.
I tried configuring the following under st.conf
tape-config-list=
"HP Ultrium 2-SCSI","HP Ultrium LTO 2","LTO-data",
"HP Ultrium","HP Ultrium LTO 1","ULTRIUM";
#
ULTRIUM =1,0x36,0,0x2D639,4,0x00,0x00,0x00,0x40,3;
LTO-data =1,0x3b,0,0x2D639,4,0x00,0x00,0x00,0x42,3;
#
but got this error after I did a reboot -- -r :
LTO-data options value invalid bits set: 0x4000
Any suggestions ?
Regards
Renee
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:51 EDT