From: Michael DeSimone (michael@desimone.net)
Date: Tue Jan 20 2004 - 20:02:43 EST
General concencus is nope, I have to bust it open. One other suggestion from Shane is pasted below. It will work but if I have to reboot I might as well just pop it open and take a peek. I did have a vendor say it has to be 256s and offered me "a good deal" but honestly I don't trust how these boxes were set up.
Thanks everyone,
Michael
you could change the diag-level in OBP from min to max causing POST to run and
output to the console. It will give you a summary of the size of memory per
slot per bank.
Michael DeSimone wrote:
> Hello Managers,
> I have a 420 that I know has 2 GB of Ram. I need to upgrade it to 4 GB
> of Ram. I do not know how the Ram is configured internally ( 8x56 or
> 16x128). I'm the new guy and of course none of the people that have
> been here a while know. I tried using memconf but it gives you a
> waring that it isn't sure with a 420 and the comments in the code back
> that up. Since memconf uses prtdiag I fugured it would be of little
> use to me - and when I tried it was.
>
> My question to my fellow llist members is:
> Does anyone know of another way to find this out other then to crack
> the box open?
>
>
> Thanks,
> Michael
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:51 EDT