From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Tue May 27 2003 - 13:34:14 EDT
You can get similiar output via lsc command.
# lsc
Please wait while we determine the processor megahertz rate ...
attribute value description
architecture PowerPC Processor architecture
implementation Pulsar Processor Implementation
version PowerPC_RS64III Processor version
clock_speed 750.8 CPU clock speed in MHz (approximation)
width 64 Processor width (bits)
ncpus 8 Number of CPUs
realmem 8388608 Amount of usable real memory (Kilobytes)
cache_attrib 1 Split instruction and data cache
icache_size 128 L1 instruction cache size (Kilobytes)
icache_asc 2 L1 instruction cache Associativity
icache_block 128 L1 instruction cache block size (bytes)
icache_line 128 L1 instruction cache line size (bytes)
dcache_size 128 L1 data cache size (Kilobytes)
dcache_asc 2 L1 data cache Associativity
dcache_block 128 L1 data cache block size (bytes)
dcache_line 128 L1 data cache line size (bytes)
L2_cache_size 8192 L2 cache size (Kilobytes)
L2_cache_asc 1 L2 cache associativity
tlb_attrib 3 Combined instruction and data TLB
tlb_size 512 TLB size (entries)
tlb_asc 4 TLB associativity
resv_size 128 Size of reservation (bytes)
priv_lck_cnt 0 Spin lock count in supervisor mode
prob_lck_cnt 0 Spin lock count in problem state
rtc_type RTC_POWER_PC RTC type
virt_alias 0 Hardware aliasing not supported
cach_cong 0 Number of page bits for cache synonym
Xint 78125 Used in time base conversion
Xfrac 58749 Used in time base conversion
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX Certified Advanced Technical Expert
-----Original Message-----
From: N. Leenders [mailto:nadine@UALBERTA.CA]
Sent: Tuesday, May 27, 2003 9:33 AM
To: aix-l@Princeton.EDU
Subject: Re: [aix-l] adenine is up (fwd)
Hi,
I'm wondering how to get information similar to the following from my
machine:
POWER 3 Processor
Clock speed
375MHz
FP Results/Clock
4
Peak Performance
1.5 Gflops
L1 Instruction Cache
32 KB
L1 Data Cache Line Size
128 bytes
L1 Data Cache
64 KB
L2 Cache
8192 KB
Thanks, Nadine
This electronic message transmission, including any attachments, contains information from PacifiCare Health Systems Inc. which may be confidential or privileged. The information is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify the sender immediately by a "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:52 EDT