From: Green, Simon (Simon.Green@EU.ALTRIA.COM)
Date: Fri Apr 11 2003 - 12:00:22 EDT
I had a problem with an F80 yesterday and needed to boot it into maintenance
mode.
However, when I tried to do this from CD the system got stuck with LED 0c45
- unable to configure the console. This was after various messages had been
displayed, and I'd pressed "5" to boot from CD. Also, I had previously been
logged on to the system with this terminal and I had successfully accessed
the SMS menus.
The console is an IBM 3153. The CD I used was AIX 4.3.3 volume 1, from
LCD4-0286-07, dated 09/2001. I'm positive that I booted this system from
either this version of the CD or an older one last year. I don't have a
newer version.
I successfully booted from a mksysb tape in the end.
Can anybody else with F80s and/or 3153 terminals let me know what version of
CD you're using?
Simon Green
Altria ITSC Europe s.a.r.l.
AIX-L Archive at http://marc.theaimsgroup.com/?l=aix-l&r=1&w=2
AIX FAQ at http://www.faqs.org/faqs/aix-faq/
N.B. Unsolicited email from vendors will not be appreciated.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:44 EDT