From: Taylor, David (DTaylor@WBMI.COM)
Date: Fri Apr 11 2003 - 12:04:00 EDT
Just to throw in my $0.02. I NEVER use auto-negotiation on my switches or NICs. I've been bitten by it more than once. I specify everything whenever possible.
David
-----Original Message-----
From: John Jolet [mailto:john.jolet@FXFN.COM]
Sent: Friday, April 11, 2003 10:43 AM
To: aix-l@Princeton.EDU
Subject: Re: ftp speed
i had a similar situation, turned out my ethernet card was set to 100 full,
but the switch port was autodetect. Setting the card to also be autodetect
fixed it. check both the server and pc and make sure the cards agree with
the switch ports.
-----Original Message-----
From: Nita Hyde [mailto:hydejl@SBAC.EDU]
Sent: Friday, April 11, 2003 10:16 AM
To: aix-l@Princeton.EDU
Subject: ftp speed
I have a strange problem. We have a pSeries RS6000 running AIX 5.1.
Ftp works fine between this box and any other RS6000. However, when you
ftp from a PC using dos or any other form of ftp, it does the ftp but
takes way too long. When ftping from the RS6000 to that same PC, it
works as quickly as one would expect. I'm talking significant times.
For instance:
PC to RS6000 transfer of 1004750 bytes takes 59.1 seconds
RS6000 to PC transfer of 1004750 bytes takes 1.2 seconds
Any suggestions would be greatly appreciated. TIA.
--
Nita Hyde
School Board of Alachua County
620 East University Avenue
Gainesville, Fl. 32601
Phone (352) 955-7500 Ext. 248
Fax (352) 955-6700
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:44 EDT