Antwort: Re: p630 over HMC on SP - done it with P690's

From: fmu@OERAG.DE
Date: Mon Mar 17 2003 - 13:04:10 EST

• Next message: Myers, Drew: "Re: Installation woes"
• Previous message: Bill Verzal: "Re: p630 over HMC on SP - done it with P690's"
• Next in thread: Bill Verzal: "Re: Antwort: Re: p630 over HMC on SP - done it with P690's"
• Maybe reply: Bill Verzal: "Re: Antwort: Re: p630 over HMC on SP - done it with P690's"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Bill,

>Did you configure the HMC into PSSP ?

Yes, I think so. What is the way to test it?

>You need the hscroot user and password for the PSSP software to get the
config data from the HMC.

Yes, I have set the password for the hscroot over smitty --> Enter Database
Information --> Hardware Management Console Information --> here I set the
IP-Adress and the hscroot
Must the hscroot-user be an SP-user?

Best regards,
Frank Müller

• Next message: Myers, Drew: "Re: Installation woes"
• Previous message: Bill Verzal: "Re: p630 over HMC on SP - done it with P690's"
• Next in thread: Bill Verzal: "Re: Antwort: Re: p630 over HMC on SP - done it with P690's"
• Maybe reply: Bill Verzal: "Re: Antwort: Re: p630 over HMC on SP - done it with P690's"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:40 EDT