From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Mon Mar 17 2003 - 14:17:23 EST
smitty enter_data
Non-SP Frame Information
HMC - pSeries 670/690
Did you do this step ?
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
fmu@OERAG.DE
Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
03/17/2003 12:04 PM
Please respond to "IBM AIX Discussion List"
To: aix-l@Princeton.EDU
cc:
Subject: Antwort: Re: p630 over HMC on SP - done it with P690's
Hi Bill,
>Did you configure the HMC into PSSP ?
Yes, I think so. What is the way to test it?
>You need the hscroot user and password for the PSSP software to get the
config data from the HMC.
Yes, I have set the password for the hscroot over smitty --> Enter
Database
Information --> Hardware Management Console Information --> here I set the
IP-Adress and the hscroot
Must the hscroot-user be an SP-user?
Best regards,
Frank Müller
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:40 EDT