From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Mon Mar 17 2003 - 12:54:50 EST
Did you configure the HMC into PSSP ? You need the hscroot user and
password for the PSSP software to get the config data from the HMC.
The CWS needs to be able to talk to the HMC via the hscroot ID, or any ID
you specify.
BV
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
fmu@OERAG.DE
Sent by: "IBM AIX Discussion List" <aix-l@Princeton.EDU>
03/17/2003 10:53 AM
Please respond to "IBM AIX Discussion List"
To: aix-l@Princeton.EDU
cc:
Subject: p630 over HMC on SP
Hi *,
I want to configure a p630 over HMC on our SP. We have 1 x SP-frame
8nodes), no SP-switch, attached 2 x 6H1 (Frame 2,3) and now a p630 over
HMC.
cws is on AIX 5.1_ML03 and PSSP 3.5 latest ptfset.
The spmon command with option -G find the new frame and the new node. But
the spmon without the -G option not.
Additional find the splstdata -f the new frame but the splstdata -n no new
node.
Have I a problem with partions? And what is the reason, that the SDR shows
no new node?
#spmon -G -d
1. Checking server process
Process 26198 has accumulated 0 minutes and 6 seconds.
Check successful
2. Opening connection to server
Connection opened
Check successful
3. Querying frame(s)
4 frames
Check successful
4. Checking frames
Controller Slot 17 Switch Switch Power supplies
Frame Responds Switch Power Clocking A B C D
----- ---------- ------- ------ -------- ----- ----- ----- -----
1 yes no N/A N/A on on on on
2 yes no N/A N/A N/A N/A N/A N/A
3 yes no N/A N/A N/A N/A N/A N/A
4 yes no N/A N/A N/A N/A N/A N/A
5. Checking nodes
----------------------------------- Frame 1
----------------------------------
Host Switch Key Env Front Panel
LCD/LED
Slot Node Type Power Responds Responds Switch Error LCD/LED
Flashes
---- ---- ----- ----- -------- -------- ------- ----- ----------------
-------
1 1 wide on yes noconn normal no LEDs are blank
no
3 3 wide on yes noconn N/A no LCDs are blank
no
5 5 thin on yes noconn normal no LEDs are blank
no
6 6 thin on yes noconn normal no LEDs are blank
no
7 7 wide on yes noconn N/A no LCDs are blank
no
9 9 wide on yes noconn N/A no LCDs are blank
no
13 13 wide on yes noconn N/A no LCDs are blank
no
15 15 wide on yes noconn N/A no LCDs are blank
no
----------------------------------- Frame 2
----------------------------------
Host Switch Key Env Front Panel
LCD/LED
Slot Node Type Power Responds Responds Switch Error LCD/LED
Flashes
---- ---- ----- ----- -------- -------- ------- ----- ----------------
-------
1 17 extrn on yes noconn N/A N/A LCDs are blank
no
----------------------------------- Frame 3
----------------------------------
Host Switch Key Env Front Panel
LCD/LED
Slot Node Type Power Responds Responds Switch Error LCD/LED
Flashes
---- ---- ----- ----- -------- -------- ------- ----- ----------------
-------
1 33 extrn on yes noconn N/A N/A LCDs are blank
no
----------------------------------- Frame 4
----------------------------------
Host Switch Key Env Front Panel
LCD/LED
Slot Node Type Power Responds Responds Switch Error LCD/LED
Flashes
---- ---- ----- ----- -------- -------- ------- ----- ----------------
-------
1 49 thin on ERR ERR N/A N/A LCDs are blank
N/A
(root:hermes_e)[/]
# splstdata -n
List Node Configuration Information
node# frame# slot# slots initial_hostname reliable_hostname dce_hostname
default_route processor_type processors_installed description
on_switch LPAR_name
----- ------ ----- ----- ----------------- -----------------
----------------- --------------- -------------- --------------------
--------------- --------- ----------
1 1 1 2 charon charon_e ""
100.100.1.5 UP 1 135_MHz_P2SC_Wi
0 ""
3 1 3 2 pegasus pegasus_e ""
100.100.1.5 MP 4 332_MHz_SMP_Wid
0 ""
5 1 5 1 apollon apollon_e ""
100.100.1.5 UP 1 120_MHz_P2SC_Th
0 ""
6 1 6 1 styx styx_e ""
100.100.1.5 UP 1 120_MHz_P2SC_Th
0 ""
7 1 7 2 argus argus_e ""
100.100.1.5 MP 2 375/450_MHz_POW
0 ""
9 1 9 2 zeus zeus_e ""
100.100.1.5 MP 2 375/450_MHz_POW
0 ""
13 1 13 2 ikarus ikarus_e ""
100.100.1.5 MP 2 332_MHz_SMP_Wid
0 ""
15 1 15 2 medusa medusa_e ""
100.100.1.5 MP 2 332_MHz_SMP_Wid
0 ""
17 2 1 1 helios helios_e ""
100.100.1.5 MP 2 7026-6H1
0 ""
33 3 1 1 phoenix phoenix_e ""
100.100.1.5 MP 2 7026-6H1
0 ""
(root:hermes_e)[/]
# splstdata -f
List Frame Database Information
frame# tty s1_tty frame_type hardware_protocol
control_ipaddrs domain_name
------ ---------------- ---------------- ---------------
------------------
--------------- -----------
1 /dev/tty1 "" noswitch SP
"" ""
2 /dev/tty2 "" "" CSP
"" ""
3 /dev/tty3 "" "" CSP
"" ""
4 "" "" "" HMC
100.100.1.20 Castor
# splstdata -p
List System Partition Information
System Partitions:
------------------
hermes_e
Syspar: hermes_e
-------------------------------------------------------------------------------
syspar_name hermes_e
ip_address 100.100.1.5
install_image default
syspar_dir ""
code_version PSSP-3.2
haem_cdb_version 1047914467,456888731,0
auth_install k4
auth_root_rcmd k4
auth_methods k4:std
ts_auth_methods compat
Best regards,
Frank Müller
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:40 EDT