From: Bill Verzal (Bill_Verzal@BCBSIL.COM)
Date: Mon Jan 06 2003 - 10:20:48 EST
OK - got a good one here. At least it looks like one to me so far...
I built a new SP cluster on a P690 Regatta last week. Now, I am trying to
get some NFS stuff to work. Here is what is happening:
# hostname
f01n01
# mount spcws02:/aixapps /mnt
mount: 1831-008 giving up on:
spcws02:/aixapps
vmount: A system call received a parameter that is not valid.
# showmount -e spcws02
export list for spcws02:
/spdata/sys1/install/pssplpp (everyone)
/spdata/sys1/install/aix510/lppsource (everyone)
/aixapps (everyone)
/nodebackups (everyone)
# ping spcws02
PING spcws02: (10.129.33.254): 56 data bytes
64 bytes from 10.129.33.254: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 10.129.33.254: icmp_seq=1 ttl=255 time=0 ms
----spcws02 PING Statistics----
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0/0/0 ms
# lssrc -g nfs
Subsystem Group PID Status
biod nfs 9292 active
rpc.statd nfs 10096 active
rpc.lockd nfs 3000 active
nfsd nfs 12164 active
rpc.mountd nfs 16038 active
#exit
Connection closed.
spcws02:/ >lssrc -g nfs
Subsystem Group PID Status
biod nfs 9554 active
nfsd nfs 6986 active
rpc.mountd nfs 12650 active
rpc.statd nfs 7492 active
rpc.lockd nfs 13952 active
spcws02:/ >spmon -d
1. Checking server process
Process 24776 has accumulated 0 minutes and 0 seconds.
Check successful
2. Opening connection to server
Connection opened
Check successful
3. Querying frame(s)
1 frame
Check successful
4. Checking frames
This step was skipped because the -G flag was omitted.
5. Checking nodes
----------------------------------- Frame 1
----------------------------------
Host Switch Key Env Front Panel
LCD/LED
Slot Node Type Power Responds Responds Switch Error LCD/LED
Flashes
---- ---- ----- ----- -------- -------- ------- ----- ----------------
-------
1 1 thin on no noconn N/A N/A LCDs are blank N/A
2 2 thin on yes noconn N/A N/A LCDs are blank N/A
3 3 thin on yes noconn N/A N/A LCDs are blank N/A
4 4 thin off no noconn N/A N/A LCDs are blank N/A
5 5 thin off no noconn N/A N/A LCDs are blank N/A
6 6 thin off no noconn N/A N/A LCDs are blank N/A
I see the Host Responds is "no", but the host is indeed up. I am having
some "hags" issues on that box right now. The daemon keeps committing
suicide - signal 6.
Anyone have any ideas (on either issue) ?
BV
--------------------------------------------------------------------------------------------------------
Bill Verzal
Technical Consultant
Forbes Technical Consulting
(312) 653-3684
bill_verzal@bcbsil.com
billverzal@imcingular.com (Pager)
888-428-4025 (Pager)
MailStop: 27.202B
**********
The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately at (312)653-6000 in Illinois; (972)766-6900 in Texas; or (800)835-8699 in New Mexico.
**********
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:16:26 EDT