From: Gergen, Peter (petergergen@kpmg.com.au)
Date: Thu May 08 2003 - 23:43:31 EDT
Hi All
Has anyone ever got multi-bus failover to work on a dual HSZ40 controller
environment ?
The system is a dual KZPSA (latest firmware) AlphaServer 4100 with dual
HSZ40 controllers running HSOF v3.7-3.
The system will not boot when both controllers are running in multi-bus
failover mode and hangs when it configures NetRAIN.
When either of the two controllers is shut down then the system boots
without problems on the other working controller while in multi-bus failover
mode.
Any Help would be appreciated.
Regards
Peter Gergen
Nexus System Administrator
Tel: (03) 9288 6236 / 0418 475 575
petergergen@kpmg.com.au
kpmg Melbourne Australia
**********************************************************************
This email is intended only for the use of the individual or entity
named above and may contain information that is confidential and
privileged. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this Email is strictly prohibited. When addressed to our clients, any opinions or advice contained in this Email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. If you have received this Email in error, please notify us immediately by return email or telephone +61 2 93357000 and destroy the original message. Thank You.
**********************************************************************M
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:18 EDT