From: Mike Broderick (broderic@MIT.EDU)
Date: Tue Jan 07 2003 - 18:45:10 EST
We're running Tru64 5.1a on a ES40 w/ several local SCSI adapters
(KZPAC, KZPSAs, QLOGIC (diff)). There are SAN disks and tapes attached
to bus 4 and 6. If I pull an unused adapter (bus 3) that is unused
(never had devices attached under 5.1a) will the device mapping get all
screwed up (bus 4 becomes 3, 5 becomes 4, etc). I know this would
happen in 4.x. I think SAN devices will not be affected (have unique
WWID).
What about non SAN SCSI devices on other local SCSI buses higher than 3?
Will the cdrom0 (BTL 8-0-0) still map to 8-0-0 and the one and only
CDROM be mapped to cdrom1 on 7-0-0? Or can it somehow tell that bus 7
is the same adapter as previous bus 8 and have cdrom0 still work?
_Mike
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:49:03 EDT