From: Mihail Stoev (mstoev@negova.bg)
Date: Fri Oct 04 2002 - 04:01:21 EDT
Hello tru64-unix-managers,
We have Alpha Server 8200 running Tru64UNIX V4.0F.
When we try to install NIC - DE600-AA we understand
that we need QA-MT4AX-H8: Tru64 UNIX New Hardware Delivery-3 V4.0F
CD-ROM .
So I follow the instructions:
1. Create a target directory for the product kit:
/usr/bin/mkdir /var/tmp/nhd
/usr/bin/chown root.system /var/tmp/nhd
2. Move the product files into the target directory:
/usr/bin/gzip -dc <kitname> | /usr/bin/tar -C /var/tmp/nhd -xpf -
3. Create the ISO 9660 file system:
/usr/sbin/mkisofs -R -D -a -o /var/tmp/nhd.iso /var/tmp/nhd
4. Create a disk label:
/usr/sbin/disklabel -w -t cdfs -f /var/tmp/nhd.iso
5. Append pad data to the ISO file system:
/usr/bin/echo "\0\c" | /usr/bin/dd bs=1024k conv=sync >>/var/tmp/nhd.iso
and I create CDROM.
Then I try follow the instructions:
>>> boot -flag fax -file GENERIC CD-ROM_device
but if i try with CD-ROM_device there was a problem
no osf_boot found and system terminates. So I boot the machine
with :
>>> boot -flag fax -file GENERIC
and after that I follow the instruction and everything so well
to the time when
i reach 206 207 ....... 12 and after thet error again
the message is that there are no enough memory ?!?!!.
And system halt. I try the same but again and again the same.
Our Alpha Server have 2GB of memory !
What can I do. I follow the instruction but ..... errors.
Are there something undefined.
-- Best regards, Mihail mailto:mstoev@negova.bg
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:55 EDT