From: Parkin Frank - fparki (fparki@acxiom.co.uk)
Date: Wed Jul 10 2002 - 05:26:56 EDT
Original Question:
Is this working on TRU64 v5.1a?
If so, what is the maximum number of cards you can aggregate?
Answer:
Thanks to Tom Webster (webster@ssdpdc.lgb.cal.boeing.com)
It's working on Tru64 5.1A w/ PK2 installed. I don't know
what the
upper limit is, beyond the max count for the system. You
may also
want to check on the limits on the other side.
Fault-tolerance is only sported on the 'alt' and 'ee'
devices, not
on the tulips (tu). I don't know if fault tolerance works
only Tru64
to Tru64, or if any switch vendors support this scheme.
I'm using a two port lag group (soon to be a four port) on
our Legato
backup server to improve through-put to the local backbone
switch.
Regards
Frank
Frank Parkin
Unix Systems Administrator
email: frank.parkin@acxiom.com
tel: 0191 525 7350
********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT