From: George Kahler (george@yorku.ca)
Date: Wed Jan 30 2008 - 20:47:59 EST
There were well over dozen replies which most suggested to use flash
archive.
The flash archive can be created from the source server, then I can
boot the new target server from a CD/DVD and select to install the
flash archive.
Many thanks to all who replied.
George
On Mon, 28 Jan 2008 20:40:39 -0500 (EST), George Kahler <george@yorku.ca> wrote:
> I have a number of SunFire X4200 M2 x64 servers that require Solaris
> 10 x86 to be installed on them. I have installed and configured all of
> the software on the first server.
>
> Q: has anyone figured out a way to (perhaps use the built-in LSI RAID
> controller) clone these servers ?
>
> BTW, PXE/jumpstart is not an option at this time.
>
> Thanks,
> George
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:44 EDT