From: George Kahler (george@yorku.ca)
Date: Fri Mar 14 2008 - 10:33:03 EST
It appears that my previous summary post did not make it out to the
list. My appologies for that.
There were well over dozen replies which most suggested to use flash
archive.
The flash archive can be created from the source server, then I can
boot the new target server from a CD/DVD and select to install the
flash archive.
Many thanks to all who replied.
George
On Mon, 28 Jan 2008 20:40:39 -0500 (EST), George Kahler <george@yorku.ca> wrote:
> I have a number of SunFire X4200 M2 x64 servers that require Solaris
> 10 x86 to be installed on them. I have installed and configured all of
> the software on the first server.
>
> Q: has anyone figured out a way to (perhaps use the built-in LSI RAID
> controller) clone these servers ?
>
> BTW, PXE/jumpstart is not an option at this time.
>
> Thanks,
> George
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:51 EDT