From: Shannon Adams (shannon_adams68@yahoo.com)
Date: Fri Feb 01 2008 - 18:26:14 EST
Solaris 9 12/03 s9s_u5wos_08b SPARC
When adding or reseting serial printers in on Solaris 9 system, we use the following command (as an example):
/usr/opt/annex/rtelnet -broaP 10.15.4.10 7002 /dev/bm015
This seems to work fine most of the time, but occasionally an error such as the following will appear:
ERR :10512:20041027204139: Unable to allocate a master pty.
When
this error occurs, the only way around it is to do a reboot; which is
not very convenient. Is there a way around it outside of having to
reboot the system?
Thanks,
Shannon Adams
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:44 EDT