From: rmp dmd (rmp.dmd1229@gmail.com)
Date: Tue Jan 15 2008 - 13:25:58 EST
Thanks for all reply especially Jeff Marble, Matther Taylor and Francisco
Roque.
Here's the summary:
After the LAN cards were transferred and boot -r will update
/etc/path_to_install similar with this line:
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0" 4 "nxge"
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0,1" 5 "nxge"
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0,2" 6 "nxge"
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0,3" 7 "nxge"
"/pci@0/pci@0/pci@9/network@0" 0 "nxge"
"/pci@0/pci@0/pci@9/network@0,1" 1 "nxge"
"/pci@0/pci@0/pci@9/network@0,2" 2 "nxge"
"/pci@0/pci@0/pci@9/network@0,3" 3 "nxge"
nxge4 and nxge7 can be configured for network use. But if you want to return
to nxge0 to nxge3, edit /etc/path_to_install with:
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0" 0 "nxge"
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0,1" 1 "nxge"
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0,2" 2 "nxge"
"/pci@0/pci@0/pci@8/pci@0/pci@2/network@0,3" 3 "nxge"
then boot -r
# ifconfig nxge0 plumb, no more errors.
Many Thanks!
---------- Forwarded message ----------
From: rmp dmd <rmp.dmd1229@gmail.com>
Date: Jan 10, 2008 9:33 AM
Subject: ifconfig: plumb: nxge0: Invalid argument
To: sunmanagers@sunmanagers.org
Hi,
I transfered a Sun x8 Express Quad Gigabit Ethernet from one riser to
another on the same SunFire T5220. After that, I'm getting "ifconfig: plumb:
nxge0: Invalid argument".
Before I transferred, it was working and I thought it could be just
resetting the devices. I tried reset-all on boot prompt but it doesn't
help.
The driver is installed.
# modinfo | grep nxg
164 7bf70000 5cb68 148 1 nxge (Sun NIU 10Gb Ethernet 1.10)
No error on /var/adm/messages.
Thanks!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:40 EDT