From: Elaine . (cmap_sec@yahoo.co.uk)
Date: Thu Jan 19 2006 - 10:21:07 EST
hi
I'm trying to configure smartd to email me out on a
disk failure.
Sounds easy but I have
/dev/rdsk/c1t1d0 -S on -o on -a -I 194 -m emailaddress
in my smartd.conf and smartd is starting ok, but when
I shutdown and
take out the disk, nothing happens...should i be
referring to a slice
not a raw disk ? Are the fact they are metadevices
mucking it up (don't
think that would matter) ? Does it not care the disk
isn't there now as
thats not a "failing" as such ?
The system can send mail fine from the command line
and the logs shows
smart knows the disk isn't there now.
Jan 17 09:18:55 box smartd[177]: [ID 283364
daemon.crit] Device:
/dev/rdsk/c1t1d0s0, failed Test Unit Ready [err=-5]
Jan 17 11:32:05 box smartd[174]: [ID 865013
daemon.crit] Unable to
register SCSI device /dev/dsk/c1t1d0s0 at line 29 of
file
/usr/local/etc/smartd.conf
Any help appreciated.
Elaine
___________________________________________________________
Win a BlackBerry device from O2 with Yahoo!. Enter now. http://www.yahoo.co.uk/blackberry
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:38:34 EDT