From: sudesh.shetty@wipro.com
Date: Mon Nov 28 2005 - 06:13:46 EST
Hi,
I have solaris 8 system with Vxvm 3.5 . I had a filesystem /data mounted
on /dev/vx/dsk/datadg/datavol volume of 10gb size. As user wanted some more
space , i had added a disk in the same diskgroup datadg.
Then, i used the following command to grow the volume by 4gb.
#vxassist -g datadg growto datavol 14000m
After this, the vxprint -htg o/p show me that the volume datavol has been
increased to 14GB but df -k o/p still shows 10GB.
Please, explain where i am wrong.
Regards
SUDESH
Confidentiality Notice
The information contained in this electronic message and any attachments to
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:37:10 EDT