From: Laurence Moughan (Laurence.Moughan@aerlingus.com)
Date: Wed Nov 24 2004 - 09:02:55 EST
Hi All,
Appologies if OT,
But
I am building a clustered env for oracle,
2 x V240 with 2 x 3310 raid scsi connected.
Installed vxfs/vxvm and vcs
Question is, i have greated my rootdg, and mirrored it ( with the two
internal disks ( on both servers )
Now im building the volumes for oracle to use ( on the 3310;s )
I'm going to add the whole of the first 3310 as an oracle diskgroup on
node1, and then split to volumes - /dev/vx/dsk/oradg/oradata,
dev/vx/dsk/oradg/oralogs etc
then plex with the disks on the 2nd 3310 to mirror them.
vx will know about these and display with vxprint
how will veritas on node2 know about these ?
do i have to repeat this operation on the other node ? - or when my vcs
is configured - will this handle the volumes ?
Thanks
laurence
For low fares and great deals on hotels, car hire and travel insurance visit http://www.aerlingus.com
of any action in reliance upon, this information by persons or entities
other than the intended recipient is prohibited.If you have received
this email in error please notify the sender immediately and delete
the material.
*******************************************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:46 EDT