T3 interconnect cable pinouts + CM 2.2

From: Stoyan Angelov (s_angelov@filibeto.org)
Date: Wed Oct 13 2004 - 12:59:08 EDT

• Next message: Gary Lopez: "IDE question .."
• Previous message: Laurence Moughan: "sudo a tar when ive no read persmission on fuiles to tar !"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

hello all,

can anyone please share the pinouts of the T3 disk tray interconnect
cable (the one that connects to the interconnect board) ?
the only information i was able to find is that the cable it is:
  . DB9M to DB9M (not FC-AL compliant)
  . from sunsolve
    - 0.33m DB9 Interconnect Cable 530-2842
    - 0.6m DB9 Interconnect Cable 530-2843
    - "Serial"
i am also looking for the management software "component manager 2.2".
documentation states that it is free of charge - i looked at sun's site
but it was not in the download area. does anyone know how can i obtain it ?

thank you for your time.

Stoyan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Gary Lopez: "IDE question .."
• Previous message: Laurence Moughan: "sudo a tar when ive no read persmission on fuiles to tar !"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:34 EDT