From: Kelv (kelv@courgette.jml.net)
Date: Mon Aug 23 2004 - 13:08:23 EDT
Hello,
Does anyone here have experience with the Sun SRC/P raid controller? *
Having read page 142 of Sun StorEdge SRC/P Intelligent SCSI RAID
Controller User's guide (rev May 1999) the symptom my system has matches
the second one in the list.
LEDs 6 and 7 alternating with LEDs 5 and 8.
The solution reads "These patterns indicate that the SRC/P Controller is
not being configured by the main logic board that supports PCI bridge
devices. Contact Sun Microsystems".
I gave the serial number for my system to the support representative who
happily chirped that I would have to pay $2500 for on site help or
$200/hour for telephone support, minimum 2 hours. Daylight robbery.
Any ideas on what the problem is? The card currently resides in PCI slot 7
(the first 64 bit one from the top in the E450). It is not listed by
show-devs or OBDiag.
Right now the problem is something of a show stopper so if anybody can
help I would really appreciate it.
Kelv
* DPT SmartRAID Millenium PM3755U2B
+ Battery Backup Module BB4050
+ SCSI Expansion module SX4055U2-2
+ 64MB ECC EDO DIMM DM4050-64
3.3/5v 64bit 33mhz
Fitted in a Sun Enterprise E-450 (4 cpu)
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:20 EDT