Install solaris 9 on a Fire V100

From: Johan A. (lasted@xrs.net)
Date: Fri Jun 04 2004 - 08:50:07 EDT


Hi,

I'm trying to install solaris 9 on a Sun Fire V100. But after I've typed 'boot cdrom' at the ok prompt I only get:

Executing last command: boot cdrom
Boot device: /pci@1f,0/ide@d/cdrom@3,0:f File and args:
SunOS Release 5.9 Version Generic 64-bit
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Configuring /dev and /devices
NOTICE: dmfe1: PHY 1 link down
WARNING: timeout: reset target chno = 1 targ = 2
WARNING: timeout: reset bus chno = 1 targ = 2
WARNING: timeout: reset target chno = 1 targ = 2
WARNING: timeout: reset bus chno = 1 targ = 2

Is this a problem with the IDE-channel? I've replaced the old Sun-disk with a Samsung SpinPoint since the original disk was broken. But is this disk also broken or is it a problem with the internal CD-rom?

Best regards, Johan

_____________________________________________________________
Xtreme Resource Services - For Free!
Get Your @xrs.net Mail at http://xrs.net/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:47 EDT