From: Friendly System Admin (sunuser@star-wars.ath.cx)
Date: Thu Jun 03 2004 - 11:13:36 EDT
Folks,
Thanks to all who responded. Many many thanks to Casper for solving this
issue. For some obscure reason media didn't copy properly after issuing la
-la command (suggested by Casper) verified the correct content. I deleted
the directory copy the image using ./setup_install_server (which I have
done it before) and re-jumped the server. All worked like a charm.
Regards,
Friendly System Admin
On Tue, 1 Jun 2004, Local Admin wrote:
> Folks,
>
> I seems to have smiliar issue posted back in April 2001 however, its not
> related to nfs. Please see the result below from the jumpstart client:
>
> <snip>
> ok boot net - install
> Resetting ...
>
> SPARCstation 5, No Keyboard
> ROM Rev. 2.15, 64 MB memory installed, Serial #7870663.
> Ethernet address 8:0:20:78:18:c7, Host ID: 807818c7.
>
>
>
> Rebooting with command: net - install
> Boot device: /iommu/sbus/ledma@5,8400010/le@5,8c00000 File and args: -
> install
> 20c00
> SunOS Release 5.8 Version Generic_108528-13 32-bit
> Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
> whoami: no domain name
> Configuring /dev and /devices
> Using RPC Bootparams for network configuration information.
> Configured interface le0
> Searching for configuration file(s)...
> Using sysid configuration file
> 192.168.2.38:/jumpstart/jass-4.0.1/Sysidcfg/Solaris_8/sysidcfg
> The system is coming up. Please wait.
> Starting remote procedure call (RPC) services: sysidns done.
> cat: cannot open /cdrom/.cdtoc
> cat: cannot open /cdrom/.cdtoc
> expr: syntax error
> expr: syntax error
> cat: cannot open /cdrom/.cdtoc
> expr: syntax error
> Starting Solaris installation program...
> Searching for JumpStart directory...
> Using rules.ok from 192.168.2.38:/jumpstart/jass-4.0.1.
> Checking rules.ok file...
> Using profile: Profiles/js-dmoccv.profile
> Using finish script: Drivers/secure.driver
> Executing JumpStart preinstall phase...
> Searching for SolStart directory...
> Checking rules.ok file...
> Using begin script: install_begin
> Using finish script: patch_finish
> Executing SolStart preinstall phase...
> Executing begin script "install_begin"...
> Begin script install_begin execution completed.
>
> ERROR: Could not load the media (/cdrom)
> #
> </snip>
>
> My jumpstart server is a sparc 5 machine and jumpstart directory is one of
> the disk reside under my disk pack.
>
> Any assistance in this matter is greatly appreciated.
>
> Kind regards,
> Friendly System Admin
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:48 EDT