From: Rajibd (rajibd@hclinsys.com)
Date: Wed May 12 2004 - 09:17:01 EDT
Hello Sun Gurus ,
I have SUN Fire V880 server , with 8GB RAM , dual CPU . I was running
STOP+A Command and i got Ok prompt.
I have given some commands like test-net etc. and go.
Suddenly my system crashed , with PANIC: cpu thread , bad trap ....
After restart , i didnt get any crash image in /var/crash/srims directory.
srims is my host name.
Where the crash image dissapered. I checkd /etc/dumpadm.conf it was ok and
enabled.
Can any one help me out , as i want to know the reason of crash,
Thanks ,
Raj D.
------
On Wed, 12 May 2004, Allen Wooden wrote:
> Hello all,
>
> I need to upgrade the IB Boards on my 4 A5000's and I'd like some advise from
> those who've gone through this. Currently the disks on these arrays are under
> Veritas VM control. I've read in the firmware readme that the arrays need to be
> quiet when I upgrade the firmware so I'm wondering if it would be sufficent to
> just boot into single-user to do the upgrade and make sure the volumes are not mounted.
>
> Or should I boot off CD so VM is not running period. and mount the boot drive (on a D1000) so
> luxadm can access the firmware file.
>
> Also, should I leave the arrays to be upgraded powered on or should I only poweron the array
> I'm upgrading at the time and leave the others powered off.
>
> Thanks
>
> Allen
> --
> Allen Wooden
> Harboreast Hosting Solutions
> http://www.harboreast.net
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:38 EDT