From: Tobias (toblun@sunos.se)
Date: Tue Apr 27 2004 - 12:57:25 EDT
Hi
Problem solved. The non-sun adapter was the problem.
I'm now usign a Sun 13w3 to 5xBNC cable and running 1600x1200x75.
Thanks to Sonny Baillargeon for highlighting the problem with non-sun
adapters!
Original post:
> Hi managers!
>
> I've run in to a problem with the Creator 3d in my Ultra 10.
> I'm using a non-sun 13w3 to VGA adapter and a old MAG DJ920 monitor.
> I'm runnig Solaris 10, also tried with Solaris 9.
> If I try to change resolution (even to a lower) to any other then
> 1152x900x66 to screen gets black. I've tried 1600x1200x75 at my PC
> without any problems with the same monitor.
>
> Output from ffbconfig -prconf :
>
> --- Hardware Configuration for /dev/fbs/ffb0 ---
> Type: double-buffered FFB2+ with Z-buffer
> Board: rev 2 (Vertical)
> PROM Information: @(#)ffb2p.fth 2.9 98/07/14
> FBC: version 0x3241906d
> DAC: Brooktree 9070, version 1 (Pac2)
> 3DRAM: Mitsubishi 130a, version 1
> EDID Data: Not Available
> Monitor Sense ID: 3 (Sun monitor)
> Monitor possible resolution: 1152x900x66
> Current resolution setting: 1152x900x66
>
> I will summarize!
> Thanks in advance.
>
> //Tobias
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
>
//Tobias
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:32 EDT