From: Tobias (toblun@sunos.se)
Date: Sun Apr 25 2004 - 16:08:48 EDT
Hi managers!
I've run in to a problem with the Creator 3d in my Ultra 10.
I'm using a non-sun 13w3 to VGA adapter and a old MAG DJ920 monitor.
I'm runnig Solaris 10, also tried with Solaris 9.
If I try to change resolution (even to a lower) to any other then
1152x900x66 to screen gets black. I've tried 1600x1200x75 at my PC
without any problems with the same monitor.
Output from ffbconfig -prconf :
--- Hardware Configuration for /dev/fbs/ffb0 ---
Type: double-buffered FFB2+ with Z-buffer
Board: rev 2 (Vertical)
PROM Information: @(#)ffb2p.fth 2.9 98/07/14
FBC: version 0x3241906d
DAC: Brooktree 9070, version 1 (Pac2)
3DRAM: Mitsubishi 130a, version 1
EDID Data: Not Available
Monitor Sense ID: 3 (Sun monitor)
Monitor possible resolution: 1152x900x66
Current resolution setting: 1152x900x66
I will summarize!
Thanks in advance.
//Tobias
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:31 EDT