From: Glenn J Franshaw (gfranshaw@lumenare.com)
Date: Mon Jan 19 2004 - 11:00:51 EST
I am also planning to purchase a Hard Disk of the same model (ST340014A)
for my Ultra-10 machine.
Can anyone, who has used this Hard Disk model in a Ultra-10, guide as to how
should we get the
hard disk providing 40GB capacity.
Early answers would be much appreciated.
Thanks and Regards
Glenn
Hi Sun Managers,
I bought a new Seagate hard disk of capacity 40 GB.
Model No is ST340014A.
I want to install this on Ultra 10 Sun machine which
has Solaris 7 Operating System.
I installed this as slave and it shows only 5.77 GB.
Kindly guide me how to get the whole 40 GB.
Here is the output of the format command.
1. c0t1d0 <ST340014A cyl 12007 alt 2 hd 16 sec 63>
/pci@1f,0/pci@1,1/ide@3/dad@1,0
Current partition table (original):
Total disk cylinders available: 12007 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 12006 5.77GB (12007/0/0) 12103056
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Regards,
Saravana Babu.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:51 EDT