From: Saravana Babu GH - CTD ,Chennai (saravanababugh@ctd.hcltech.com)
Date: Mon Jan 19 2004 - 04:31:15 EST
Hi Sun Managers,
I bought a new Seagate hard disk of capacity 40 GB.
Model No is ST340014A.
I want to install this on Ultra 10 Sun machine which
has Solaris 7 Operating System.
I installed this as slave and it shows only 5.77 GB.
Kindly guide me how to get the whole 40 GB.
Here is the output of the format command.
1. c0t1d0 <ST340014A cyl 12007 alt 2 hd 16 sec 63>
/pci@1f,0/pci@1,1/ide@3/dad@1,0
Current partition table (original):
Total disk cylinders available: 12007 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 12006 5.77GB (12007/0/0) 12103056
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
Thanks and Regards,
Saravana Babu.
Regards,
Saravana Babu.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:51 EDT