From: Richard.Skelton@infineon.com
Date: Thu Oct 16 2003 - 05:36:09 EDT
Hi,
I received only out of office reply's :-(
Original post:-
I have an E450 which is showing an Enclosure Temperature = 11 deg.C which is
much lower than the room temperature.
Do I have problem with the sensor?
How do I fix it?
Where is it?
Cheers
Richard.
____________________________________________________
| OBDiag - Version 4.5
|
|_________________________ ________________________
| | |
|
| 1 SUNW,envctrl@14,60000| 2 TSI,gfxp@4 | 3 ebus@1
|
| 4 ecpp@14,3043bc | 5 eeprom@14,0 | 6 fdthree@14,3023f0
|
| 7 network@1,1 | 8 scsi@2 | 9 scsi@3
|
| 10 se@14,400000 | 11 su@14,3062f8 | 12 su@14,3083f8
|
|_________________________|_________________________|
| Commands: test test-all except help what printenvs setenv versions exit
|
|____________________________________________________
command> test 1
Hit the spacebar to interrupt testing
Testing /pci@1f,4000/ebus@1/SUNW,envctrl@14,600000
SUBTEST: init-i2c
SUBTEST: ambient-temp
Enclosure Temperature = 11 deg.C
SUBTEST: checking-cpus
SUNW,UltraSPARC-II CPU #0 Temperature = 40 deg.C, delta = 29 deg.C
SUNW,UltraSPARC-II CPU #1 Temperature = 40 deg.C, delta = 29 deg.C
SUNW,UltraSPARC-II CPU #2 Temperature = 40 deg.C, delta = 29 deg.C
SUNW,UltraSPARC-II CPU #3 Temperature = 40 deg.C, delta = 29 deg.C
SUBTEST: ps-fans
spin port data = de
spin port data = f
global-intr-port data = 6f
global-intr-port value is = 7f
fan data = f8
fan data = f8
fan data = f8
SUBTEST: cpu-fans
spin port data = df
spin port data = 11
global-intr-port data = 6f
global-intr-port value is = 7f
fan data = c7
fan data = c7
fan data = c7
SUBTEST: probe-power-supplies
Power Supply 0 : Present
SUBTEST: check-ps
SUBTEST: ps0-temp
Power Supply Inlet Temperature = 28 deg.C
Power Supply +3.3V OR-ing Diode Temperature = 25 deg.C, delta = -3 deg.C
Power Supply +5.0V OR-ing Diode Temperature = 28 deg.C, delta = 0 deg.C
Power Supply +12.0V OR-ing Diode Temperature = 25 deg.C, delta = -3 deg.C
Power Supply 1 : Present
SUBTEST: check-ps
SUBTEST: ps1-temp
Power Supply Inlet Temperature = 26 deg.C
Power Supply +3.3V OR-ing Diode Temperature = 25 deg.C, delta = -1 deg.C
Power Supply +5.0V OR-ing Diode Temperature = 26 deg.C, delta = 0 deg.C
Power Supply +12.0V OR-ing Diode Temperature = 26 deg.C, delta = 0 deg.C
Power Supply 2 : Present
SUBTEST: check-ps
SUBTEST: ps2-temp
Power Supply Inlet Temperature = 27 deg.C
Power Supply +3.3V OR-ing Diode Temperature = 25 deg.C, delta = -2 deg.C
Power Supply +5.0V OR-ing Diode Temperature = 26 deg.C, delta = -1 deg.C
Power Supply +12.0V OR-ing Diode Temperature = 24 deg.C, delta = -3 deg.C
SUBTEST: led-test
Middle Option Disks : Not there
Upper Option Disks : Not there
Walking LEDs ..............
Selftest at /pci@1f,4000/ebus@1/SUNW,envctrl@14,600000 passed
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:27:17 EDT