From: Chris Denneen (sunmanagers@ghostspace.com)
Date: Wed Jul 16 2003 - 14:22:32 EDT
I can't figure out what this error means and how to fix it.
below is the output from the boot of our V880
Can someone please shed some light to explain what " WARNING: cannot
find ssc050_get_port_bit " means.
Thanks
Chris
screen not found.
keyboard not found.
Keyboard not present. Using ttya for input and output.
Sun Fire 880, No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.6, 4096 MB memory installed, Serial #51059315.
Ethernet address 0:3:ba:b:1a:73, Host ID: 830b1a73.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cf78084b,0:a
File and args:
SunOS Release 5.8 Version Generic_108528-20 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
WARNING: cannot find ssc050_get_port_bit
configuring IPv4 interfaces: eri0.
Hostname: hostname.mydomain.com
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t1d0s0: is logging.
/dev/rdsk/c1t0d0s4: is logging.
IP Filter: attach to [eri0,0] - IPv4
IP Filter: v3.4.28, attaching complete.
Set 0 now inactive
filter sync'd
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway
hostname.mydomain.com
syslog service starting.
volume management starting.
Starting UCD-Snmpd...
The system is ready.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:46 EDT