From: Haywood, Steven (shaywood@hurricaneseye.com)
Date: Tue May 06 2003 - 11:14:10 EDT
Hi
Sorry folks, I think I may have been a bit ambiguous here.
The compile has suceeded. However, the test phase of the build has failed
(actually running gpg)
Cheers
S
> -----Original Message-----
> From: Haywood, Steven [mailto:shaywood@hurricaneseye.com]
> Sent: Tuesday, May 06, 2003 3:58 PM
> To: 'sunmanagers@sunmanagers.org'
> Subject: GnuPG on Solaris 2.6
>
>
> Hiya folks
> Got a problem on a Solaris 2.6 box (with ANDIrand installed,
> before you ask
> ;)
> I've compiled GPG from scratch but it just will not work.
> "make check" fails
> on just about every test, the log files say "Caught some
> signal, exiting".
> I ran it through truss and got:
> .
> .
> .
> open64("./plain-1.asc", O_RDONLY) = 4
> read(4, " - - - - - B E G I N P".., 8192) = 2014
> brk(0x000D0600) = 0
> brk(0x000D2600) = 0
> brk(0x000D2600) = 0
> brk(0x000D4600) = 0
> brk(0x000D4600) = 0
> brk(0x000D8600) = 0
> brk(0x000D8600) = 0
> brk(0x000E0600) = 0
> read(4, 0x000CD9C8, 8192) = 0
> Incurred fault #6, FLTBOUNDS %pc = 0x00749CCC
> siginfo: SIGSEGV SEGV_MAPERR addr=0x00749CCC
> Received signal #11, SIGSEGV [caught]
> siginfo: SIGSEGV SEGV_MAPERR addr=0x00749CCC
>
>
> gcc is SMCgcc v3.2.3, libgcc is 3.2.2. (Had the same problem
> with SMCgcc
> 2.95.2)
>
> Has anyone managed to get this working?
> Thanks
> Steven
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:21 EDT