From: Haywood, Steven (shaywood@hurricaneseye.com)
Date: Tue May 06 2003 - 10:58:05 EDT
Hiya folks
Got a problem on a Solaris 2.6 box (with ANDIrand installed, before you ask
;)
I've compiled GPG from scratch but it just will not work. "make check" fails
on just about every test, the log files say "Caught some signal, exiting".
I ran it through truss and got:
.
.
.
open64("./plain-1.asc", O_RDONLY) = 4
read(4, " - - - - - B E G I N P".., 8192) = 2014
brk(0x000D0600) = 0
brk(0x000D2600) = 0
brk(0x000D2600) = 0
brk(0x000D4600) = 0
brk(0x000D4600) = 0
brk(0x000D8600) = 0
brk(0x000D8600) = 0
brk(0x000E0600) = 0
read(4, 0x000CD9C8, 8192) = 0
Incurred fault #6, FLTBOUNDS %pc = 0x00749CCC
siginfo: SIGSEGV SEGV_MAPERR addr=0x00749CCC
Received signal #11, SIGSEGV [caught]
siginfo: SIGSEGV SEGV_MAPERR addr=0x00749CCC
gcc is SMCgcc v3.2.3, libgcc is 3.2.2. (Had the same problem with SMCgcc
2.95.2)
Has anyone managed to get this working?
Thanks
Steven
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:21 EDT