From: Gerard Henry (Gerard.Henry@cmi.univ-mrs.fr)
Date: Thu May 02 2002 - 09:54:23 EDT
Thanks to all who respond:
Pierre.Zimmermann@tecnomen.fi
mikelist@sky.net
krister.bergman@sun.com
Steve Mickeler <steve@neptune.ca>
adaptec don't support this card on sparc
perhaps on sparc/solaris until solaris 2.6 (i have solaris 8) with
driver adp?
I forgot to consult sunmanagers archives, this question already appears
and it is the same answer now.
>>-----Original Message-----
>>From: Gerard Henry [mailto:Gerard.Henry@cmi.univ-mrs.fr]
>>Sent: 02 May 2002 15:00
>>To: Sun Managers (E-mail)
>>Subject: adaptec scsi 2940 on solaris sparc
>>
>>
>>hello,
>>i have a scsi card from adaptec:AHA-2940U2W.
>>I installed it on sun blade 100 with a drive.
>>probe-scsi-all say nothing.
>>When i did
>>ok show-devs, i see something about scsi
>>when i boot, there is only this message:
>>May 2 12:15:20 atarnajuat scsi: [ID 193665 kern.info] sd0 at uata0:
>>target 1 lun 0
>>
>>but i am unable to use this disk.(with format, or iostat -En).
>>
>>Anybody know if this card works on solaris sparc? IIvisit
>>adaptec web,
>>but there is nothing about this card and solaris.
>>
>>TIA,,i will resume.
>>--
>>Gerard HENRY
>>_______________________________________________
>>sunmanagers mailing list
>>sunmanagers@sunmanagers.org
>>http://www.sunmanagers.org/mailman/listinfo/sunmanagers
>>
>
>
>
-- Gerard HENRY LATP UMR 6632 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:16 EDT