From: Raj Mendu (rmendu@linkshare.com)
Date: Thu May 02 2002 - 08:31:24 EDT
Hi
I was wondering if anyone has successfully attached a M1500
tape system to sun box. I'm having trouble with my ultra 5 seeing the
tape library.
Here is the set-up:
*ultra 5 running solaris 8
*I have ITI3140UD-VS lsilogic ultra-wide SCSI PCI differential
adapter
(lsilogic says the drivers are included on solaris7 CD, i'm assuming
they are on solaris 8 as well--i did complete solaris 8 install)
*scsi-3 cable connecting M1500 and ultra5
i made the following changes to st.conf for dlt8000
tape-config-list = "QUANTUM DLT8000", "M1500",
"1,0x38,0,0x8639,4,0x84,0x85,0x88
,0x89,3;";
after a boot -r, i don't see anything in /dev/rmt/
then i tried--> touch /reconfigure
drvconfig -i st (results in unable to attach
driver: st ERROR)
tapes
At the back end of the tape system , i see SCSI/SE/LVD and my HBA seems
to be HVD from the description, do i have the wrong HBA? is this the
problem?
probe-scsi only shows /pci1f,0/pci@1/scsi@2
any help would be appreciated!
Thanks
-- Raj Mendu Manager of Systems Operations Linkshare Corporation 215 Park Ave S., 8th Floor, New York, NY 10003 (646)-654-6000 x356 (T) (646)-602-0160 (F) rmendu@linkshare.com -- Register for free today and join over 600 of the most successful affiliate programs on the Web: http://www.linkshare.com/join Confidential Information (C) Copyright 1999-2001, LinkShare Corporation This message is intended only for the use of the Addressee and may contain information that is PRIVILEGED and CONFIDENTIAL. If you are not the intended recipient, dissemination of this communication is prohibited. If you have received this communication in error, please erase all copies of the message and its attachments and notify us immediately _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:16 EDT