From: Peter Unmack (peter@fish.la.asu.edu)
Date: Thu Apr 29 2004 - 21:00:53 EDT
G'day folks
I have run into two problems relating to my disk setup after intalling
hp-ux 11.0. Firstly, I have one 4 gig disk that has worked and mounted
fine for many years, but sam will not mount it, it returns a message that
says
mount: /dev/dsk/c0t1d0 /ctrium: invalid argument
but when I issue the command at the command line
mount /dev/dsk/c0t1d0 /ctrium
it mounts just fine. sam still lists it as unused though and I need
to have it remount automatically each boot. Any clues on what to do?
The second problem I have is I needed to increase the size of
/dev/vg00/lvol7 (/usr), which I couldn't do from sam since sam is based in
that volume (I presume). Thus I did it via command line as
lvextend -L 800 /dev/vg00/lvol7, which sam recognizes when I look under
disks and file systems, but when I do a bdf it still thinks it is 500
megs. When I go to install another program via sam it then tells me that
I do not have sufficient space in /usr. I have never used lvm before,
thus am probably missing something fairly obvious.
Any suggestions would be greatly appreciated.
Thanks
Peter Unmack
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:40 EDT