From: admin@cf2tree.com
Date: Fri Jul 18 2003 - 18:41:31 EDT
Hi,
Just acquired a rp7405 system running 11i. Also came with the system is a
VA7100 Disk Array. This is my first experience with Virtual Array and Surestore
Command, so bear with me for asking such simple questions:
1) There are a total of eight 36G FC HDD in the unit, why I only see 4 JBOD
Disks(although each is 73.4GB) when I do 'cvui'? How did they get paired up?
Storage Device Selection
Choice Device Id Alias Device Type
===============================================================================
1 50060b0000151090 HP Storage Array
2 QUANTUMATLAS10K3_73_SCA3X94AE0N HP JBOD Disk
3 QUANTUMATLAS10K3_73_SCA3X938UV8 HP JBOD Disk
4 QUANTUMATLAS10K3_73_SCA3X92NH60 HP JBOD Disk
5 QUANTUMATLAS10K3_73_SCA3X92W595 HP JBOD Disk
6 Refresh
2) VA7100 is AutoRaid, right? There is no need to specify the type of RAID,
automatically determined by itself, right?
3) What do I do if one of the disks fail? How do I replace it, and how VA will
recover the data?
Thank you in advance.
-- ---> Please post QUESTIONS and SUMMARIES only!! <--- To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only) http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:31 EDT