[HPADM] make_recovery error

From: Gonzalo Tipola (GTipola@ingenium.com.bo)
Date: Fri Jul 18 2003 - 16:41:38 EDT


dear Admins,
I was trying to do make_recovery -Av for my box K360, but it exit with the following error:
# make_recovery -Av
NOTE: make_recovery(103): The make_recovery command will be replaced by
         make_tape_recovery. Both commands are supported in this
         release (Ignite-UX Revision 3.2). Please read the man page
         make_tape_recovery(1M) for usage of the new command. In a
         future release, make_recovery will be replaced by a script
         that calls make_tape_recovery.
      Option -A specified. Entire Core Volume Group/disk will be backed up.
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
NOTE: vgdisplay -v unsuccessful
 

      ***************************************
       HP-UX System Recovery
       Validating append file
               Done
       File Systems on Core OS Disks/Volume Groups:
                vg name = vg00
                pv_name = /dev/dsk/c0t5d0
        vg00 /dev/vg00/lvol3 /
        vg00 /dev/vg00/lvol8 /home
        vg00 /dev/vg00/lvol11 /informix
        vg00 /dev/vg00/lvol4 /opt
        vg00 /dev/vg00/lvol1 /stand
        vg00 /dev/vg00/lvol5 /tmp
        vg00 /dev/vg00/lvol6 /usr
        vg00 /dev/vg00/lvol7 /var
        Create mount points
         /usuario2
         /backup
         /sistemas
         /usersBK
         /backfin
         /backpen
        /opt is a mounted directory
          It is in the Core Volume Group
          Mounted at /dev/vg00/lvol4

        /var is a mounted directory
          It is in the Core Volume Group
          Mounted at /dev/vg00/lvol7
       Destination = /dev/rmt/0mn
       Boot LIF location = /var/tmp/uxinstlf.recovery
 
      ***************************************
       Creating the configuration file.
               Done
       Modifying the configuration file.
               Done
       Backing up vg configurations
               Volume Group vg00
make_recovery(482): Call to system failed. errno=0
        Cleanup

Any help with this will be greatly appreciated.
Regards,
Gonzalo T.

--
             ---> Please post QUESTIONS and SUMMARIES only!! <---
        To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
       Name: hpux-admin@dutchworks.nl     Owner: owner-hpux-admin@dutchworks.nl
 
 Archives:  ftp.dutchworks.nl:/pub/digests/hpux-admin       (FTP, browse only)
            http://www.dutchworks.nl/htbin/hpsysadmin   (Web, browse & search)


This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:31 EDT