From: Arjan Fraaij (hpux-admin@zonnet.nl)
Date: Thu Sep 12 2002 - 09:05:50 EDT
Hello,
After reading several post, downloading patches (and installing) I seem
not to be able to put the 100Bt cards on 100Mb?
HP-UX 10.20 OS running
Installed Products:
100BT-EISA-FMT B.10.20.01 100BT/9000 formatter product.
100BT-EISA-KRN B.10.20.01 100BT/9000 EISA kernel products.
100BT-EISA-RUN B.10.20.01 100BT/9000 EISA command
products.
Servers are Model 800 D370 upgraded to D390.
The output of IOSCAN is as follow:
ioscan -funC lan
Class I H/W Path Driver S/W State H/W Type Description
===================================================================
lan 0 8/16/6 lan2 CLAIMED INTERFACE Built-in LAN
/dev/diag/lan0 /dev/i4target
/dev/ether0 /dev/lan0
lan 1 8/20/5/1 token1 CLAIMED INTERFACE EISA card MDG0002
/dev/diag/lan1 /dev/lan1
lan 2 8/20/5/8 btlan0 CLAIMED INTERFACE EISA card INP0500
Is it normal that I donīt see a device path for the btlan0?
The result of Lanscan:
lanscan
Hardware Station Crd Hardware Net-Interface NM MAC HP
DLPI Mjr
Path Address In# State NameUnit State ID Type
Support Num
8/16/6 0x080009559A74 0 UP lan0 UP 4 ETHER
Yes 52
8/20/5/1 0x0000F63ADA14 1 UP lan1 UP 5 802.5
Yes 102
8/20/5/8 0x0060B058E26F 2 UP btlan02 UP 6 ETHER
Yes 136
Lanadmin display result:
LAN INTERFACE STATUS DISPLAY
Thu, Sep 12,2002 14:51:43
Network Management ID = 6
Description = btlan02 Hewlett-Packard LAN adapter
Rev0
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 10000000
Station Address = 0x60b058e26f
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 0
Inbound Octets = 1213214046
Inbound Unicast Packets = 5499699
Inbound Non-Unicast Packets = 687313
Inbound Discards = 49958
Inbound Errors = 0
Inbound Unknown Protocols = 50086
Outbound Octets = 2318428159
Outbound Unicast Packets = 19019311
Outbound Non-Unicast Packets = 15045
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 0
Lanadmin result of trying to put the card to 100Mb
lanadmin -S 100HD 6
Old Speed = 10000000
Unable to change speed: errno = 22
lanadmin -X 100HD 6
Error: This option is not supported for this hardware.
Who can tell me whats going wrong? Could it be that the card is not on
a 100Mb port? Or should I receive an other error message then?
Are the patches installed wrong, is there a way to check this?
Please help!
Arjan Fraaij
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:19 EDT