From: Larry Wood (lwood@allegromicro.com)
Date: Fri Jul 26 2002 - 16:08:08 EDT
I only got a couple of responses pointing me to the arraydsp and arraymgr
commands. From everything I can see using these commands, the array
is healthy but I still have no idea what took place nor regarding the
answers
to any of my specific questions.
Original post on 7/22/02:
I have an HP Surestore E Disk Array 12H attached to an HP 9000/785/J5000
running HPUX 11.0. I got this email today.
=======================================
Sun Jul 21 14:22:58 2002
Array Monitor Daemon
=======================================
Disk array on /dev/rdsk/c4t1d0 at aiken
is processing a hot plug event. Do not remove
disk until the array has finished processing the event.
#1. What is a 'hot plug event'?
#2. Do I have reason to be concerned?
#3. How do I know when "the array has finished processing the event"?
#4. Where can I find more info on Array Monitor Daemons "events"?
I tried searching 'hot plug event' on docs.hp.com and in the
archives
without much luck.
--
Larry Wood CAD/CAE System Administrator
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, MA. 01615
email: lwood@allegromicro.com
Phone: (508)854-5425 Fax: (508)853-2431
--
---> Please post QUESTIONS and SUMMARIES only!! <---
To subscribe/unsubscribe to this list, contact majordomo@dutchworks.nl
Name: hpux-admin@dutchworks.nl Owner: owner-hpux-admin@dutchworks.nl
Archives: ftp.dutchworks.nl:/pub/digests/hpux-admin (FTP, browse only)
http://www.dutchworks.nl/htbin/hpsysadmin (Web, browse & search)
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 11:02:17 EDT