From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Thu Apr 01 2004 - 11:53:43 EST
The uesensor command is H/W specific. Evidently, the p655 has no software
interfaceable sensors.
Try 'diag' and see if it can. If diag can read the sensors, all you have
to do is figure out which commands 'diag' is running.
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
kmdowney@GOODYEAR
.COM
Sent by: IBM AIX To
Discussion List aix-l@Princeton.EDU
<aix-l@Princeton. cc
EDU>
Subject
Command to monitor P655 hardware
04/01/2004 10:36 temperatures
AM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
Greetings,
I am having problems monitoring the hardware temperatures on the P655s (AIX
5.2 ML2) we have. When I run the command
/usr/lpp/diagnostics/bin/uesensor -l
it returns with
There are no environmental sensors on this system.
The uesensor command works on the P630 (AIX 5.2 ML2) we have.
Am I missing something on the P655s? Do I need to install any additional
lpps or is the P655 hardware just not capable of doing this?
Thanks,
Kevin
May Contain Confidential and/or Proprietary Information.
May not be copied or disseminated without the expressed
written consent of The Goodyear Tire & Rubber Company.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:48 EDT