From: Damir Delija (damir.delija@PBZ.HR)
Date: Fri Apr 02 2004 - 05:30:32 EST
Acutlly if your machine is in LPAR mode than you can't acess sensors
you have probably this stuation
Something can be seen on HMC as alarms
or trough rc.powerfail script signal handling
I hope this helps
Damir
PS: here is small script which I use to monitor temperature
> -----Original Message-----
> From: kmdowney@GOODYEAR.COM [mailto:kmdowney@GOODYEAR.COM]
> Sent: Thursday, April 01, 2004 6:36 PM
> To: aix-l@Princeton.EDU
> Subject: Command to monitor P655 hardware temperatures
>
>
> Greetings,
>
> I am having problems monitoring the hardware temperatures on
> the P655s (AIX 5.2 ML2) we have. When I run the command
> /usr/lpp/diagnostics/bin/uesensor -l
> it returns with
> There are no environmental sensors on this system.
>
> The uesensor command works on the P630 (AIX 5.2 ML2) we have.
> Am I missing something on the P655s? Do I need to install any
> additional lpps or is the P655 hardware just not capable of
> doing this?
>
> Thanks,
> Kevin
>
> May Contain Confidential and/or Proprietary Information.
> May not be copied or disseminated without the expressed
> written consent of The Goodyear Tire & Rubber Company.
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:48 EDT