From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Fri Mar 12 2004 - 08:54:54 EST
You'll need to add the disk back into the array.
Smit | Devices | SSA RAID Arrays
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
cuihh cuihh
<cuihh6@HOTMAIL.C
OM> To
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
<aix-l@Princeton.
EDU> Subject
Disk in the 7133 was rejected.
03/12/2004 03:04
AM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
One 7133 ssa disk subsystem. I do several tests on it.
I have made a raid-5 array with pdisk2,pdisk3,pdisk4.
At first the status of the array is good. After i unplug pdisk2 from the
array, the status of the raid-5 array become exposed and soon degraded. But
after i plug pdisk2 back to the the array the raid-5 array was not
rebuilding, still in degraded status. Why ?
How can i add back pdisk2 to the raid-5 array without any loss of data ?
_________________________________________________________________
Ãâ·ÑÏÂÔØ MSN Explorer: http://explorer.msn.com/lccn/
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:41 EDT