From: Mark Schlechte (MSCHLECH@REGINA.CA)
Date: Fri Mar 05 2004 - 09:36:31 EST
Hmmm. On the 2 client machines that work they don't list anything.
The problem client just lists i4conmgr as active which I assume is some
connection manager.
The License server lists i4gdb and i4lmd as active.
>>> jkremblas@REDHEARTGIFTS.COM 03/04/04 04:43pm >>>
Yes, you can verify by typing in the command:
i4cfg -list
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
Mark Schlechte
Sent: Thursday, March 04, 2004 3:28 PM
To: aix-l@Princeton.EDU
Subject: Re: C for AIX 5 - i4ls - LUM question
I looked at that earlier from some notes I had.
The /etc/i4ls.rc file was linked to /var/ifor/i4ls.rc file which does
a:
i4cfg -start -nopause
On the problem server it was an empty file for some reason so I copied
it from
another working server. Same result.
Maybe I have some corrupted files?
After I issue that cmd can I verify the status of it somehow?
>>> jkremblas@REDHEARTGIFTS.COM 03/04/04 04:18pm >>>
type in
i4cfg -start
to start your servers
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU] On Behalf Of
Mark Schlechte
Sent: Thursday, March 04, 2004 3:03 PM
To: aix-l@Princeton.EDU
Subject: C for AIX 5 - i4ls - LUM question
I need a little assistance troubleshooting a C compiler issue if
someonce can give me some.
I have one server running as my LUM server and 3 other servers that I
have setup to act
as clients. 2 work and 1 doesn't (but used to).
I am trying to remember how to troubleshoot this and so far have re-run
the
'i4cfg -script' option to redefine my config.
I can run the 'i4blt -s -l c' cmd and it seems to report it correctly.
However if I try and compile something via 'cc -o xxx xxx.c' (which
works
on the other clients) it takes a long time but eventually fails
saying:
1506-333 (S) License failure: acquire: No servers available etc.
lssrc -g iforls shows:
8:ROOT > lssrc -g iforls
Subsystem Group PID Status
i4conmgr iforls 16448 active
i4lmd iforls inoperative
i4gdb iforls inoperative
i4llmd iforls inoperative
Any ideas on how I should troubleshoot this? Log files?
Like I said I have 2 working servers so it shouldn't be too hard to get
this working
but, alas, so far it is.
Mark
BTW these are all 4.3.3 servers.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:40 EDT