From: Adams Kevin J (kevin.adams@PHS.COM)
Date: Fri Feb 13 2004 - 15:55:30 EST
I use this in one of my scripts for checking those kinds of things:
/usr/lpp/diagnostics/bin/uesensor -l
You also have SSA commands for their enclosures.
Kevin Adams
PacifiCare Behavioral Health
Principal Systems Analyst
AIX CATE
-----Original Message-----
From: IBM AIX Discussion List [mailto:aix-l@Princeton.EDU]On Behalf Of
Webb, Eric
Sent: Friday, February 13, 2004 12:32 PM
To: aix-l@Princeton.EDU
Subject: [aix-l] command to monitor hardware
Is there a command that will give hardware (enclosure) stats, such as
condition of power supplies, voltages, fans (rotational speed), etc? I know
the error log should report a lot of these problems, but I'm looking for a
way to monitor these directly.
Thanks,
> Eric C. Webb
> Sr. Systems Analyst / AIX System Administrator
>
> Cooper Lighting Division IT
> (770) 486-4623 (770) 486-4677 FAX
>
This electronic message transmission, including any attachments, contains
information from PacifiCare Health Systems Inc. which may be confidential or
privileged. The information is intended to be for the use of the individual or
entity named above. If you are not the intended recipient, be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited.
If you have received this electronic transmission in error, please notify the
sender immediately by a "reply to sender only" message and destroy all
electronic and hard copies of the communication, including attachments.
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:36 EDT