From: Bill Verzal (BVerzal@KOMATSUNA.COM)
Date: Fri Feb 13 2004 - 15:54:31 EST
/usr/lpp/diagnostics/bin/uesensor will give you most of what you want.
BV
--------------------------------------------------------
"If everything is coming your way, then you are in the wrong lane"
Bill Verzal
AIX Administrator, Komatsu America
(847) 970-3726 - direct
(847) 970-4184 - fax
"Webb, Eric"
<EWEBB@COOPERLIGH
TING.COM> To
Sent by: IBM AIX aix-l@Princeton.EDU
Discussion List cc
<aix-l@Princeton.
EDU> Subject
command to monitor hardware
02/13/2004 02:32
PM
Please respond to
IBM AIX
Discussion List
<aix-l@Princeton.
EDU>
Is there a command that will give hardware (enclosure) stats, such as
condition of power supplies, voltages, fans (rotational speed), etc? I
know
the error log should report a lot of these problems, but I'm looking for a
way to monitor these directly.
Thanks,
> Eric C. Webb
> Sr. Systems Analyst / AIX System Administrator
>
> Cooper Lighting Division IT
> (770) 486-4623 (770) 486-4677 FAX
>
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 22:17:36 EDT